Page 38 - 6 Handpumps hoses accessories

puteus
Important tips for the use of pre-filters and filter cartridges
Please note the following points:
▪ Do not exceed the maximum temperature and working pressure. ▪ Do not expose the filter to direct sunlight or frost.
▪ Minimum distance to the ground: 100 mm.
▪ Minimum distance to the wall: 80 mm.
▪ Do only use connection fittings with cylindrical threads.
▪ Seal with PTFE tape. Do not use hemp, silicone or curing fluids.
▪ Handle with care:Do not knock or drop the filter.
▪ Clean only with a sponge and water, do not use benzine, alcohol or hydrocarbenised liquids. ▪ Check all screw connections for tightness before use.
Replacing the filter cartridges
▫ Before opening the filter interrupt water supply, then open vent valve and allow air to escape. ▫ Open the lid only with special key.
▫ Remove the old filter cartridge, clean glass container as described.
▫ Insert a new filter cartrigde in the correct position.
▫ Check the o-ring seat before placing the lid on the container. ▫ Close the lid.
▫ Open water supply.
▫ Only close vent valve until all air has escaped.
▫ Allow water to run some time before using it.

X
max. 50°C
S
X LI I
C O N E
PASTE
X
PTFE-TAPE
√
Filter cartridges for pre-filters
Polypropylene filter basket
suitable for:
55001-E
55002-E
mesh size 150μ (micron), max. 60° C operating temperature, max. 3000l/h, Ø 60 mm
Item-No.:
Item-No.:
for sediment (for example sand, mud, rust) up to 150 micron
55011 9
55013 3
– 36 –